114 lines
3.2 KiB
Plaintext
114 lines
3.2 KiB
Plaintext
A chisel that allows you to shape blocks.
|
|
If technic mod is present the chisel will be rechargeable.
|
|
|
|
To craft a chisel just put a steel ingot and a brown wool in the crafting grid. The steel goes above the wool.
|
|
(different recipe for technic device)
|
|
|
|
Once you have your chisel you can set the style by right clicking.
|
|
|
|
There are 5 styles to choose from(default)
|
|
- horizontal groove
|
|
- vertical groove
|
|
- cross groves (this matches up with the vertical and horizontal grooves
|
|
- square
|
|
- 4 edges
|
|
|
|
Right click until you see the style you want in the chat then point at the node and left click.
|
|
Each node can be cut 4 times. Each time you chisel the groove will get a little deeper.
|
|
|
|
Shift right click to change the supported mod. Here the list of supported mods:
|
|
default (mychisel mod) 5 styles
|
|
facade 10 styles
|
|
|
|
Only certain nodes can be chiseled. Here are the supported nodes
|
|
|
|
|
|
Cobble
|
|
Sandstone
|
|
Clay
|
|
Coal Block
|
|
Stone
|
|
Desert Stone"
|
|
Wood
|
|
Acacia Wood
|
|
Aspen Wood
|
|
Pine Wood
|
|
Desert Cobble
|
|
Jungle Wood
|
|
Sandstone Brick
|
|
Stone Brick
|
|
Desert Stone Brick
|
|
|
|
Forum - https://forum.minetest.net/viewtopic.php?f=11&t=13104
|
|
|
|
|
|
|
|
*************************************************************************
|
|
*************************************************************************
|
|
*** added 01/2018 by Gundul ***
|
|
*** chiselapi: ***
|
|
*************************************************************************
|
|
*************************************************************************
|
|
|
|
Fist init your mod with mychisel:
|
|
|
|
chisel.add_mod(modname,number)
|
|
|
|
modname = the name of your mod
|
|
number = number of different styles for each node
|
|
|
|
|
|
Then register your nodes with mychisel:
|
|
|
|
chisel.register_node(modname, prefix, raw, design)
|
|
|
|
modname = the name of your node
|
|
prefix = prefix of your new node name right behind the ":", usually the name of the raw material without "modname:"
|
|
raw = name of the raw material for example "default:stone"
|
|
design = name of your nodestyle after beeing chiseled
|
|
|
|
|
|
Naming your nodes:
|
|
|
|
In your mod the nodes should be named like this: modname..":"..prefix.."_"..design
|
|
|
|
|
|
|
|
depends.txt:
|
|
|
|
In your modfolder add this line to your depends.txt: mychisel?
|
|
|
|
|
|
|
|
|
|
|
|
Example: you made a mod named "pillar" with 3 different pillar designs
|
|
|
|
first register your mod: chisel.add_mod(pillar,3)
|
|
|
|
|
|
then register each node of it:
|
|
|
|
chisel.register_node("pillar", "stone", "default:stone", "round")
|
|
chisel.register_node("pillar", "stone", "default:stone", "square")
|
|
chisel.register_node("pillar", "stone", "default:stone", "hexagon")
|
|
|
|
|
|
Do this for every material your mod supports:
|
|
|
|
chisel.register_node("pillar", "sandstone", "default:sandstone", "round")
|
|
chisel.register_node("pillar", "sandstone", "default:sandstone", "square")
|
|
chisel.register_node("pillar", "sandstone", "default:sandstone", "hexagon")
|
|
...
|
|
|
|
|
|
In your mod the nodes should have names like:
|
|
|
|
pillar:stone_round
|
|
pillar:stone_square
|
|
pillar:stone_hexagon
|
|
pillar:sandstone_round
|
|
...
|
|
|
|
|
|
|